Best value
Vgate iCar Pro (Bluetooth 4.0)
A low-cost adapter that does everything DropFuel needs.
- Bluetooth Low Energy: connects inside the app, no pairing code
- Sleeps when the car is off
- ELM327-compatible
Adapters
DropFuel talks to your car through a small Bluetooth OBD-II adapter. Any standard ELM327-compatible adapter works. These are the ones we recommend.
The buttons below are affiliate links. As an Amazon Associate I earn from qualifying purchases. Buying through them costs you nothing extra, and it does not change which adapters we recommend. How fast an adapter reads and which readings it supports vary by car.
Best value
A low-cost adapter that does everything DropFuel needs.
Compact
A small body that stays clear of your knee.
Fastest
The quickest readings, for drivers who want the smoothest gauge.
Adapters that cost five or ten dollars often work, and if you already own one, try it first. But DropFuel reads your engine many times a second for the whole drive, and that is where cheap ones tend to fall short.
Most of the cheapest adapters use a copy of the ELM327 chip, often with only part of its commands. Some readings never arrive, or an older car will not connect at all.
Fewer readings each second means the gauge lags behind your foot and short moments get missed. OBDLink says its chip takes up to twice as many readings as a standard ELM327.
An adapter that disconnects mid-drive leaves gaps in your trip, and the fuel figures for those minutes are missing.
Many cheap adapters never switch off. Left plugged in while parked, they keep drawing power from the car.
Cheap adapters often use old Bluetooth with a pairing code. Low Energy adapters connect inside the app and reconnect faster.
DropFuel connects over Bluetooth, either Low Energy (4.0 or newer) or Classic. Wi-Fi adapters are not supported.
This is the common standard nearly every consumer adapter follows. It will say so on the box.
Faster adapters give smoother scoring. Very cheap clones can be slow or drop out.
If you plan to leave it plugged in, choose one that powers down when the car is off.
The port is under the dashboard on the driver's side, usually above the pedals or beside the steering column. It needs no tools: push the adapter in and it is done.
Start in GPS-only mode. You get smoothness scoring from your phone alone, and fuel figures arrive when you add an adapter.